Konica Minolta bizhub 4020i bizhub 5020i/4020i User Guide - Page 290
Con Your Machine for a Wireless Network When the SSID Is Not Broadcast, Home >, > Con
View all Konica Minolta bizhub 4020i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Home > Network > Additional Methods of Configuring Your Machine for a Wireless Network > Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration. 1. Check and record the current wireless network settings. Network Name (SSID) Communication Mode Infrastructure For example: Network Name (SSID) HELLO Communication Mode Infrastructure Authentication Method Open System Shared Key WPA/WPA2-PSK Encryption Mode NONE WEP WEP AES TKIP (TKIP is supported for WPA-PSK only.) Authentication Method WPA2-PSK Encryption Mode AES Network Key - Network Key 12345678 If your router uses WEP encryption, enter the key used as the first WEP key. Your machine supports the use of the first WEP key only. 2. Press [ ] [Settings] > [All Settings] > [Network] > [WLAN] > [Setup Wizard]. 3. When [Enable WLAN?] appears, press [Yes]. This will start the wireless setup wizard. To cancel, press [No]. 4. The machine will search for your network and display a list of available SSIDs. Swipe up or down or press a or b to display []. Press [], and then press [OK]. 5. Enter the SSID name, and then press [OK]. 6. Press [Infrastructure] when instructed. 7. Select the Authentication Method. 8. Do one of the following: • If you selected the [Open System] option, press the Encryption type [None] or [WEP]. If you selected the [WEP] option for Encryption type, select and enter the WEP key, and then press [OK]. • If you selected the [Shared Key] option, select and enter the WEP key, and then press [OK]. • If you selected the [WPA/WPA2-PSK] option, press the Encryption type [TKIP+AES] or [AES]. Enter the WPA key, and then press [OK]. • Your machine supports the use of the first WEP key only. 9. The machine will attempt to connect to the wireless device you have selected. 284