Kyocera TASKalfa 500ci Fax System (S) C Operation Guide Rev-2 - Page 70

FAX Operation (Advanced) Broadcast Transmission This function allows you to send the same originals to several destinations in one operation. The machine stores (memorizes) originals to send in memory temporarily, and automatically repeats dialing and transmission to the set destination afterwards. NOTE: When using a group for the destination, you can send originals to up to 500 destinations in one operation. You can use this function together with sub address communication and delayed transmission. When direct transmission has been selected, it changes to memory transmission at the time of transmission. 1 Press the Send/FAX key. 2 Place the originals. 3 Select the destination. Enter the fax number 1 Press [FAX No. Entry], and use the numeric keys to enter the fax number. Press [Next Dest.] to enter the next fax number. NOTE: When On is selected in Entry Check for New Destination, a confirmation screen is displayed for the entered FAX number. Re-enter the same FAX number and press [OK]. For details, refer to Entry Check for New Destination in the Operation Guide for the machine. This setting is available with 30 ppm, 42/52 ppm and 55/50 ppm models. 2 After entering all the destinations, press [OK]. Enter the i-FAX address 1 Press [i-FAX Addr Entry]. 2 Press [i-FAX Address], enter the i-FAX address and then press [OK]. Press [Next Dest.] to enter the next i-FAX address. NOTE: When On is selected in Entry Check for New Destination, a confirmation screen is displayed for the entered FAX number. Re-enter the same FAX number and press [OK]. For details, refer to Entry Check for New Destination in the Operation Guide for the machine. This setting is available with 30 ppm, 42/52 ppm and 55/50 ppm models. 4-6 OPERATION GUIDE