Kyocera TASKalfa 500ci Fax System (S) C Operation Guide Rev-2 - Page 86

FAX Operation (Advanced) When FAX was selected in step 11. Requirements Sub Address Sender FAX Number Port Registration method Press [Sub Address] and enter the sub address using the numeric keys. You can use up to 20 digits including the numbers from 0 to 9, ' (space)', '#' and '*' characters to enter a sub address. Press [Sender FAX Number] and enter the sender's fax number using the numeric keys. You can enter up to 20 characters. Press [Port] and select [Port 1] or [Port 2]. This setting only appears when 2 optional FAX Kits (Dual FAX option) are installed. When i-FAX was selected in step 11. Requirements i-FAX Address Registration method Press [i-FAX Address]. Enter the destination Internet FAX address. You can enter up to 128 characters. NOTE: When setting a forwarding condition by selecting a sender's FAX number (a local FAX information entry of the destination machine) but leaving blank to the sender's FAX number, you can forward a FAX that is received from a sender whose number is not registered in the sender's FAX number entries. When you set the sender fax number as a forwarding requirement, select the search requirement from Search by pull-down menu. • Same as • Starts with • Ends with • Includes 13 Press [OK]. 14 Press [Next] of Forward Setting. 15 Press [Change] of Forwarding. 16 Select [On] or [Off] whether to forward or not to forward the received documents and press [OK]. 17 Press [Change] of Forward Destination. 4-22 OPERATION GUIDE