Kyocera TASKalfa 500ci Fax System (S) C Operation Guide Rev-2 - Page 90
Cancelling the Setting of RX/Forward Requirements, Forwarding Detail Settings, Activating Time Setting
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
FAX Operation (Advanced) Cancelling the Setting of RX/Forward Requirements To cancel the memory forwarding, follow the steps below. 1 Press the System Menu key. 2 Press [FAX] and then [Next] of RX/Forward Requirements. 3 Press [Off] and then [OK]. Forwarding Detail Settings With the forwarding settings, you can change the following detail settings. Activating Time Setting Specify the times when the preset requirements are activated and deactivated. 1 Follow steps 1 to 3 of Using Requirements for All Receptions on page 4-19. Follow steps 1 to 4 of Registering Settings by Requirement on page 4-21. 2 Press [Change] of Activating Time. Requirement: - Activating Time Specify the time for activating the requirements. Print or forward the faxes received during the preset time according to the requirements. All Day Preset Time Start 00 : 00 End 00 : 00 3 Select [All Day] or [Preset Time]. To forward received originals all day, select [All Day], press [OK] and then go to step 5. To set the forwarding time, select [Preset Time] and go to the next step. Status Cancel OK 08/08/2009 10:10 4 Press [+]/[-] to enter Start Time and End Time, and then press [OK]. NOTE: Enter the time on the 24 hours system. Priority Setting Set the priority of a registered forwarding requirement. 1 Follow steps 1 to 3 of Registering Settings by Requirement on page 4-21. 2 Press [Change] of Priority. 3 Press [+] or [-] or use the numeric keys to enter the priority. 4 Press [OK]. 4-26 OPERATION GUIDE