Lexmark 13R0223 User's Guide - Page 158
Cannot print from a Bluetooth-enabled device, Copy troubleshooting
UPC - 734646091732
View all Lexmark 13R0223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Cannot print from a Bluetooth-enabled device Make sure that the Bluetooth mode and the Bluetooth Discovery mode are enabled on your printer Make sure you type in the correct pass key Make sure that the external Bluetooth-enabled device is configured to communicate with the Bluetooth adapter connected to your printer 1 From the control panel, press or repeatedly until Setup is highlighted. 2 Press . 3 Press or repeatedly until Change Bluetooth Default Settings is highlighted. 4 Press . The Bluetooth Default Settings menu appears with the option for Bluetooth Enabled highlighted. 5 Press or repeatedly until On appears. 6 Press or repeatedly until the option for Discovery Mode is highlighted. 7 Press or repeatedly until On appears. 8 Press . If you set Security to High, you must type in the pass key from another Bluetooth-enabled device Consider setting Security to Low to eliminate the need for a pass key: 1 From the control panel, press or repeatedly until Setup is highlighted. 2 Press . 3 Press or repeatedly until Change Bluetooth Default Settings is highlighted. 4 Press . The Bluetooth Default Settings menu appears. 5 Press or repeatedly until the option for Security is highlighted. 6 Press or repeatedly until Low appears. 7 Press . For more information, refer to the documentation that came with the external Bluetooth-enabled device. Copy troubleshooting • "Copier does not respond" on page 159 • "Scanner unit does not close" on page 159 • "Poor copy quality" on page 159 • "Partial document or photo copies" on page 160 158