Lexmark 13R0223 User's Guide - Page 81
Using the small media feeder, Tear off only the number of s needed to print the banner.
UPC - 734646091732
View all Lexmark 13R0223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Load up to 100 sheets of custom-size paper 20 sheets of banner paper Make sure • The print side of the paper faces down. • The paper size fits within these dimensions: Width: - 76.2-215.9 mm - 3.0-8.5 inches Length: - 127.0-431.8 mm - 5.0-17.0 inches • The paper guides rest against the left, right, and bottom edges of the paper. • The print side of the banner faces down when loading. • The leading edge of the banner paper feeds into the printer first. • You have selected the correct paper size for the banner in Printing Preferences. For more information, see "Using the Printing Preferences tabs" on page 69. To load banner paper: 1 Pull Tray 1 completely out of the printer. 2 Remove all paper from Tray 1. 3 Move the paper guides as though you were loading legal-size paper. 4 Squeeze the lever and pull to extend the tray to legal size. 5 Tear off only the number of pages needed to print the banner. 6 Set the stack of pages in front of the printer. 7 Slide the first sheet from the banner stack of pages over the Tray 1 handle. Slide it all the way into the back of Tray 1. 8 Send the job to print. Using the small media feeder The small media feeder, located on top of the paper exit tray toward the back, lets you load envelopes, 4 x 6 photo paper, and other small card sizes without having to place them in Tray 1. The small media feeder is helpful when: • You want to print only one photo and you do not want to load Tray 1 with a photo card. • You want to print one envelope for a letter. You would print the letter from paper loaded in Tray 1. Then, you print the envelope quickly from the small media feeder. 81