Lexmark 13R0223 User's Guide - Page 165
Printer receives a blank fax, Received fax has poor print quality, Fax Setup, Dialing and Sending
UPC - 734646091732
View all Lexmark 13R0223 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Be sure that printer is detecting a dial tone • See "Sending a fax while listening to a call (On Hook Dial)" on page 129. • Check the Dial Method setting. 1 Listen for a dial tone. If you hear a dial tone but the printer hangs up without dialing, this means it did not recognize the dial tone. 2 From the control panel, press or repeatedly until Fax is highlighted. 3 Press . 4 Press or repeatedly until the Fax Setup submenu is highlighted. 5 Press . 6 Press or highlighted. repeatedly until the Dialing and Sending submenu is 7 Press . 8 Press or repeatedly until you reach Dial Method. 9 Press or repeatedly until Behind PBX (Dial Tone Detect Off) appears. 10 Press to save. Printer receives a blank fax Check original Check ink Cartridges may have tape on them Ask the sender to verify the original document was loaded correctly. Check the ink levels, and install a new print cartridge if necessary. 1 Remove the print cartridges. 2 Make sure the sticker and tape have been removed. 1 2 3 Reinsert the print cartridges. Received fax has poor print quality Review checklist for sender Check ink • Check that the quality of the original document is satisfactory. • Resend the fax. There may have been a problem with the quality of the telephone line connection. • Increase the fax scan resolution. Check the ink levels, and install a new print cartridge if necessary. 165