Lexmark Optra C710 Service Manual - Page 127
Transfer Belt Exhausted or 917 Error Code displays, the OPC, The waste toner bottle is not detected
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
5016-001 B 84 Transfer Belt Exhausted or 917 Error Code displays, the OPC/ ITM drive gear is turning and a new ITM does not fix the problem. FRU 1 Transfer Belt Position Sensor (PS200) Engine Board MSN Cable Action The transfer belt sensor is a LED Optotransistor pair that detects the belt by sensor (PS200) reflecting light from the LED to the belt in the ITM and back to the phototransistor. The sensor checks when the transfer belt has reached home position. Check the transfer belt sensor for correct operation. If the sensor is not operating properly, replace the FRU's in the following order. 1. Belt position sensor 2. Engine board 3. MSN cable C The waste toner bottle is not detected, and a new ITM does not fix the problem. FRU 1 Waste Toner Sensor Board (PQ350) Engine Board MSN Cable Action Check the waste toner sensor board cable and MSN cable connections. • If correct, check the waste toner sensor for proper operation. • If the sensor is not operating correctly, replace the following FRU's, in the order shown: 1. Waste toner sensor board 2. Engine board 3. MSN cable Diagnostic Information 2-61