Lexmark Optra C710 Service Manual - Page 42

5016-001 Contact Cam Operation of transferring from the OPC to the transfer belt The contact cam is stopped at the position shown in figure below. The pins fit into the grooves of the cam. Lever 1 and lever 2 are controlled at the position shown. The pin fits into the groove in lever 1 which controls the position of the transfer roller cam, detaching transfer roller from the transfer belt. The discharge roller is also detached from the transfer belt at this time. A pin in the side of lever 2 controls the cleaner lever which controls the position of the cleaner. The cleaner is detached from the transfer belt. Operation of transferring from the belt to the paper The contact cam rotates according to the movement of the solenoid and spring clutch and stops. The revolution of the cam is transmitted in the following order: transfer roller, discharge roller and cleaner. 1-18 Service Manual