Lexmark Optra C710 Service Manual - Page 229
Coupling Drive Motor Removal, Developer Drive Motor Assembly Removal, Right Side Cover
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 229 highlights
5016-001 Coupling Drive Motor Removal 1. Remove the right side cover, refer to the "Right Side Cover Removal" on page 4-4. 2. Remove the motor mounting stay assembly, refer to the "Motor Mounting Stay C Assembly Removal" on page 4-13. 3. Remove the two (2) screws from the coupling drive motor. 4. Remove the coupling drive motor. Developer Drive Motor Assembly Removal 1. Remove the right side cover, refer to the "Right Side Cover Removal" on page 4-4. 2. Remove the three (3) screws [A] from the developer drive motor assembly. 3. Disconnect the developer drive cable [B]. 4. Remove the developer drive motor assembly. Repair Information 4-7
Repair Information
4-7
5016-001
Coupling Drive Motor Removal
1.
Remove the right side cover, refer to the
“Right Side Cover
Removal” on page 4-4
.
2.
Remove the motor mounting stay assembly, refer to the
“Motor
Mounting Stay C Assembly Removal” on page 4-13
.
3.
Remove the two (2) screws from the coupling drive motor.
4.
Remove the coupling drive motor.
Developer Drive Motor Assembly Removal
1.
Remove the right side cover, refer to the
“Right Side Cover
Removal” on page 4-4
.
2.
Remove the three (3) screws
[A]
from the developer drive
motor assembly.
3.
Disconnect the developer drive cable
[B]
.
4.
Remove the developer drive motor assembly.