Lexmark Optra C710 Service Manual - Page 83

5016-001 Message Status Action 35 Res Save Off Deficient Memory The printer lacks the memory needed to enable the Resource Save function. This message usually indicates that too much memory is allocated for one or more of the printer link buffers. To disable Resource Save and continue printing, press Go. To enable Resource Save after you get this message, perform one of the following: • Set the link buffer for each interface to Auto. Then exit the menus to activate the link buffer changes. When the Ready message is displayed, enable Resource Save from the Setup Menu. • Install additional printer memory. 37 Insufficient Collation Area The printer memory (or optional hard disk, if installed) does not have the space necessary to collate the print job. Press Go to print the portion of the job already stored and begin collating the rest of the job. To cancel the print job: 37 Insufficient Defrag Memory • Press Menu> or or