Lexmark Optra C710 Service Manual - Page 231
OPC Drive Motor Removal, Cam Sensor Removal
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
5016-001 OPC Drive Motor Removal 1. Remove the right side cover, refer to the "Right Side Cover Removal" on page 4-4. 2. Remove the three (3) screws [A] from the OPC drive motor. 3. Disconnect the OPC drive motor cable [B]. 4. Slide the mechanism to the left and out of the printer. Cam Sensor Removal 1. Remove the right side cover, refer to the "Right Side Cover Removal" on page 4-4. 2. Remove the motor mounting stay assembly, refer to the "Motor Mounting Stay C Assembly Removal" on page 4-13. 3. Unclip the cam sensor connection. 4. Remove the cam sensor. Repair Information 4-9
Repair Information
4-9
5016-001
OPC Drive Motor Removal
1.
Remove the right side cover, refer to the
“Right Side Cover
Removal” on page 4-4
.
2.
Remove the three (3) screws
[A]
from the OPC drive motor.
3.
Disconnect the OPC drive motor cable
[B]
.
4.
Slide the mechanism to the left and out of the printer.
Cam Sensor Removal
1.
Remove the right side cover, refer to the
“Right Side Cover
Removal” on page 4-4
.
2.
Remove the motor mounting stay assembly, refer to the
“Motor
Mounting Stay C Assembly Removal” on page 4-13
.
3.
Unclip the cam sensor connection.
4.
Remove the cam sensor.