Lexmark Optra C710 Service Manual - Page 235
Motor Mounting Stay C Assembly Removal, Fan Mounting Bracket Removal
View all Lexmark Optra C710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
5016-001 Motor Mounting Stay C Assembly Removal 1. Remove the main fan with mounting bracket, refer to the "Main Fan Mounting Bracket Removal" on page 4-12. 2. Disconnect the cable harness from the cable clips [A]. 3. Disconnect the cam sensor cable [B]. 4. Disconnect the cam clutch cable [C]. 5. Disconnect the solenoid cable [D]. 6. Remove the two (2) screws from the top of the motor mounting stay assembly [E]. The screw on the top right is shorter and must be replaced exactly as removed. 7. Remove the two (2) screws from the right side of the motor mounting stay assembly [F]. 8. Remove the two (2) screws from the bottom of the motor mounting stay assembly [G]. Note: When reinstalling the motor mounting stay assembly, be sure the timing belt remains in place with proper tension. Repair Information 4-13