Lexmark Z65n User's Guide (1.06 MB) - Page 23
Click Select to continue the printer software installation., From the Printer Setup is Complete screen
View all Lexmark Z65n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
2 From the Configure Network Printer screen, enter the IP address you want to assign to your printer, and then click OK. 3 From the Printer Selection screen, select the next unconfigured printer from the list. Repeat step 1 and step 2 until all the printers in the list are configured. 4 From the list on the Printer Selection screen, select the printer you want to print to. 5 Click Select to continue the printer software installation. 6 Follow the steps for your operating system: Mac OS 8.6 to 9.2 Mac OS X version 10.0.3 to 10.1 When the printer software prompts you, follow the directions on the screen to install and align the cartridges. 1 From the Printer Selection screen, click Open Print Center. The Printer List appears. 2 If your printer is listed, continue with step 3. If your printer is not listed, click Add Printer, and then select Lexmark Inkjet Networking from the pop-up menu. Select your printer from the list, and then click Add. 3 Click the red close button. 4 From the Printer Selection screen, click Continue. 5 Follow the directions on the screen to install and align the cartridges. 7 From the Printer Setup is Complete screen, click Test Page to print a test page on the network printer. 8 Click Finished to complete the printer software installation. 19