Magnavox 51MP392H User manual, English (US) - Page 34

Using the Onscreen Submenus: Features SETTING THE TIMER'S ACTIVATE CONTROL After you have set the TIME, START TIME, STOP TIME, and CHANNEL, you must activate the Timer for it to operate. Your options are to set the Timer to work ONCE or DAILY. Set ACTIVATE to OFF if you don't want to use the Timer. 1 Press the MENU button on the remote control to show the onscreen menu. 2 Press the CURSOR BUTTON DOWN twice to highlight FEATURES. 3 Press the CURSOR BUTTON RIGHT to enter the FEATURES submenu. 4 Press the CURSOR BUTTON RIGHT again. Then press the CURSOR RING DOWN repeatedly until the ACTIVATE control is highlighted. 5 Press the CURSOR BUTTON RIGHT to cycle through the options and make your selection. The options are ONCE, DAILY, or OFF. 6 Press the STATUS/EXIT button to exit the menu. HELPFUL HINT • Changing the channel or adjusting the volume during the last minute of a Timer setting will cancel the shutting off of the TV. • Thirty seconds before the set changes to the channel you set (see page 33), an announcement appears on screen. PICTURE SOUND FEATURES INSTALL TIMER AutoLock CLOSED CAP FORMAT FEATURES TIMER AutoLock CLOSED CAP FORMAT TIME START TIME STOP TIME CHANNEL ACTIVATE FEATURES TIMER TIME 8:06 PM 1 3,4, START TIME STOP TIME CHANNEL 5 ACTIVATE 6 22 FEATURES TIMER TIME START TIME STOP TIME CHANNEL ACTIVATE ONCE OR ACTIVATE DAILY OR ACTIVATE OFF CHANGING TO CHANNEL 5 IN 29 SEC 34