Netgear WN604-100NAS Reference Manual - Page 18

NETGEAR Wireless N150 Access Point WN604 Reference Manual Autosensing Ethernet Connections with Auto Uplink The WN604 can connect to a standard Ethernet network. The LAN interface is autosensing and capable of full-duplex or half-duplex operation. The wireless access point incorporates Auto UplinkTM technology. The Ethernet port will automatically sense whether the Ethernet cable plugged into the port should have a "normal" connection such as to a computer or an "uplink" connection such as to a switch or hub. That port will then configure itself to the correct configuration. This feature also eliminates any concerns about crossover cables, as Auto Uplink will accommodate either type of cable to make the right connection. Compatible and Related NETGEAR Products For a list of compatible products from other manufacturers, see the Wireless Ethernet Compatibility Alliance Web site (WECA, see http://www.wi-fi.net). The following NETGEAR products work with the WN604 Wireless Access Point: • FS108P - ProSafe 8 Port 10/100 Switch with 4 Port PoE • FS116P ProSafe 16 Port 10/100 Desktop Switch with 8 Port PoE • FS726TP - ProSafe 24 Port 10/100 Smart Switch with 2 Gigabit Ports and 12 Port PoE • FS728TP - ProSafe 24+4 10/100 Smart Switch with full PoE • FS752TPS - ProSafe 48 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports and 24 Port PoE • FSM7328PS - ProSafe 24-port 10/100 L3 Managed Stackable Switch with 24 PoE Ports • FSM7352PS • GS724TP • GS748TP • WNDA3100 - RangeMax Dual Band Wireless-N USB 2.0 Adapter • WN121T RangeMax NEXT Wireless-N USB 2.0 Adapter • WN111 - RangeMax Next Wireless-N USB Adapter • WG511T 802.11g 108 Mbps Wireless CardBus Adapter • WG511 802.11g 54 Mbps Wireless CardBus Adapter • WG111 801.11g 54 Mbps Wireless USB Adapter • WPN111 - RangeMax Wireless USB 2.0 Adapter 1-4 Introduction v1.0, March 2010