Netgear WN604-100NAS Reference Manual - Page 37

Wireless Settings, Configuring 802.11b/bg/ng Wireless Settings

Get Netgear WN604-100NAS PDF manuals and user guides View all Netgear WN604-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

NETGEAR Wireless N150 Access Point WN604 Reference Manual - IP Subnet Mask. The Access Point will automatically calculate the subnet mask based on the IP address that you assign. Otherwise, you can use 255.255.255.0 (the default) as the subnet mask. - Default Gateway. Enter the IP address of the gateway for your LAN. For more complex networks, enter the address of the router for the network segment to which the wireless access point is connected. - Primary DNS Servers. The WN604 will use this IP address as the primary Domain Name Server used by stations on your LAN. - Secondary DNS Servers. The WN604 will use this IP address as the secondary Domain Name Server used by stations on your LAN. - Network Intgrity Check. Check this box to enable the WN604 to validate that the upstream link is active before allowing wirelessassociations.If you set this option you must ensure your default gateway is configured. 3. Click Apply to save your basic IP settings. Wireless Settings The following sections describe how to configure the available wireless settings. Configuring 802.11b/bg/ng Wireless Settings To configure the wireless settings of your 802.11b/bg/ng wireless access point: Basic Installation and Configuration v1.0, March 2010 2-13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
NETGEAR Wireless N150 Access Point WN604 Reference Manual
Basic Installation and Configuration
2-13
v1.0, March 2010
–
IP Subnet Mask
. The Access Point will automatically calculate the subnet mask based on
the IP address that you assign. Otherwise, you can use 255.255.255.0 (the default) as the
subnet mask.
–
Default Gateway.
Enter the IP address of the gateway for your LAN. For more complex
networks, enter the address of the router for the network segment to which the wireless
access point is connected.
–
Primary DNS Servers.
The WN604 will use this IP address as the primary Domain Name
Server used by stations on your LAN.
–
Secondary DNS Servers.
The WN604 will use this IP address as the secondary Domain
Name Server used by stations on your LAN.
–
Network Intgrity Check.
Check this box to enable the WN604 to validate that the
upstream link is active before allowing wirelessassociations.If you set this option you
must ensure your default gateway is configured.
3.
Click
Apply
to save your basic IP settings.
Wireless Settings
The following sections describe how to configure the available wireless settings.
Configuring 802.11b/bg/ng Wireless Settings
To configure the wireless settings of your 802.11b/bg/ng wireless access point: