Netgear WN604-100NAS Reference Manual - Page 64
Configuring WPA2-PSK, Configuring WPA-PSK and WPA2-PSK, Network Authentication, WPA2-PSK
View all Netgear WN604-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
NETGEAR Wireless N150 Access Point WN604 Reference Manual Configuring WPA2-PSK Not all wireless adapters support WPA2. Furthermore, client software is required on the client. Make sure your client card supports WPA2. Consult the product document for your wireless adapter and WPA2 client software for instructions on configuring WPA2 settings. Figure 3-14 Configure WPA2-PSK To configure WPA2-PSK: 1. From the Network Authentication drop-down menu, select WPA2-PSK from the list. By default, Data Encryption will be set to AES. 2. Enter the preshared key passphrase (Network Key). 3. Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations. 4. Click Apply to save your settings. Configuring WPA-PSK and WPA2-PSK Not all wireless adapters support WPA and WPA2. Client software is required on the client: 3-20 v1.0, March 2010