Netgear WN604-100NAS Reference Manual - Page 90
Wireless Point to Point Bridge, Client, Enable Wireless Client Association, MAC Clone
View all Netgear WN604-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
NETGEAR Wireless N150 Access Point WN604 Reference Manual • Wireless Point to Point Bridge • Wireless Point to Multipoint Bridge • Client mode 3. If you have selected one of the first two options: • Select Enable Wireless Client Association, if desired. • Select the security profile whose settings you wish to edit • Click Edit to edit the security profile as discussed in the previous sections. The Edit Security Profile screen displays, as shown Figure 5-5 below. • Click Back to return to the previous screen and enable the profile. 4. If you have selected Client: • MAC Clone: This option appears only in client mode. Use it to configure a new MAC address on the AP Client if desired. • MAC Clone Address. If the MAC Clone option has been enabled enter the new MAC address in hexadecimal format. It will be used by the AP client in place of its default physical address. 5. Click Apply. Figure 5-5 Bridging - Edit Security Profile 5-8 v1.0, March 2010 Advanced Configuration