Netgear WN604-100NAS Reference Manual - Page 67
Turn Access Control On, Local MAC Address Database, Trusted Wireless Stations, Delete
View all Netgear WN604-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
NETGEAR Wireless N150 Access Point WN604 Reference Manual Figure 3-16 Configure MAC authentication 3. Check the Turn Access Control On radio box to enable Access Control feature. 4. Select the desired Access Control Database options. The options are: • Local MAC Address Database - The Access Point will use the local MAC address table for Access Control. This is the default. • RADIUS MAC Address Database - The Access Point will use the MAC address table located on the external RADIUS server on the LAN for Access Control. If you choose this database, you must configure the RADIUS Server Settings first (see "Configuring the RADIUS Server Settings" on page 3-9). 5. The Trusted Wireless Stations list shows any wireless stations you have entered. If you have not entered any wireless stations this list will be empty. To delete an existing entry, select it and then click Delete. 6. Click Refresh to refresh the Available Wireless Stations list found in your area. 7. Select the stations from the list of Available Wireless Stations found in your area, or enter the MAC address of a station to add a new station manually. (You can usually find the MAC address printed on the bottom of the wireless adapter.) v1.0, March 2010 3-23