Netgear WN604-100NAS Reference Manual - Page 28

Setting up the WN604 Wireless Access Point, Configuring LAN and Wireless Access

Get Netgear WN604-100NAS PDF manuals and user guides View all Netgear WN604-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

NETGEAR Wireless N150 Access Point WN604 Reference Manual Setting up the WN604 Wireless Access Point Tip: Before mounting the WN604 in a high location, first set up and test the WN604 to verify wireless network connectivity. To set up the WN604 Wireless Access Point: 1. Prepare a computer with an Ethernet adapter. If this computer is already part of your network, record its TCP/IP configuration settings. 2. Configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 for the Subnet Mask. 3. Connect an Ethernet cable from the WN604 to the computer. 4. Turn on your computer, connect the power adapter to the WN604 and verify the following: • The PWR power light goes on. • The LAN light of the wireless access point is lit when connected to a powered on computer. • The WLAN LEDs should be blinking. Configuring LAN and Wireless Access To configure the WN604 Ethernet port for LAN access: 1. Connect to the WN604 by opening your browser and entering http://192.168.0.100 in the address field. The WN604 login screen appears (see Figure 2-1). 2. Enter admin for the user name and password for the password, both in lower case letters. 2-4 Basic Installation and Configuration v1.0, March 2010

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
NETGEAR Wireless N150 Access Point WN604 Reference Manual
2-4
Basic Installation and Configuration
v1.0, March 2010
Setting up the WN604 Wireless Access Point
To set up the WN604 Wireless Access Point:
1.
Prepare a computer with an Ethernet adapter. If this computer is already part of your network,
record its TCP/IP configuration settings.
2.
Configure the computer with a static IP address of 192.168.0.210 and 255.255.255.0 for the
Subnet Mask.
3.
Connect an Ethernet cable from the WN604 to the computer.
4.
Turn on your computer, connect the power adapter to the WN604 and verify the following:
•
The PWR power light goes on.
•
The LAN light of the wireless access point is lit when connected to a powered on
computer.
•
The WLAN LEDs should be blinking.
Configuring LAN and Wireless Access
To configure the WN604 Ethernet port for LAN access:
1.
Connect to the WN604 by opening your browser and entering
in the
address field. The WN604 login screen appears (see
Figure 2-1
).
2.
Enter
admin
for the user name and
password
for the password, both in lower case letters.
Tip:
Before mounting the WN604 in a high location, first set up and test the WN604 to
verify wireless network connectivity.