Netgear WN604-100NAS Reference Manual - Page 53

Configuring the RADIUS Server Settings

Get Netgear WN604-100NAS PDF manuals and user guides View all Netgear WN604-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

NETGEAR Wireless N150 Access Point WN604 Reference Manual Circle one: Open System or Shared Key. (Choose Shared Key for more security.) Note: If you select shared key, the other devices in the network will not connect unless they are set to Shared Key as well and have the same keys in the same positions as those in the WN604. • WEP Encryption Keys. Circle one: 64, 128, or 152 bits. (Enter all four keys for the Key Size chosen.) Key 1 Key 2 Key 3 Key 4 WPA-PSK (Preshared Key) Record the WPA-PSK key. Key WPA RADIUS Settings. For WPA, record the following settings for the primary and secondary RADIUS servers: Server Name/IP Address: Primary Secondary Port Shared Secret Use the procedures described in the following sections to configure the WN604. Store this information in a safe place. Configuring the RADIUS Server Settings You can setup or modify the RADIUS Server settings to compliment Network Authentication security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server settings must be configured before completing the Network Authentication security profile (see "Configuring WPA with RADIUS" on page 3-14, "Configuring WPA2 with RADIUS" on page 3-16, or "Configuring WPA and WPA2 with RADIUS" on page 3-17 for specifics on implementing these security options). Note: The RADIUS Server Settings apply to all profiles. They only need to be configured once per wireless access point. 3-9 v1.0, March 2010

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
NETGEAR Wireless N150 Access Point WN604 Reference Manual
3-9
v1.0, March 2010
Circle one: Open System or Shared Key. (Choose Shared Key for more security.)
Note:
If you select shared key, the other devices in the network will not connect unless they
are set to Shared Key as well and have the same keys in the same positions as those in the
WN604.
•
WEP Encryption Keys.
Circle one: 64, 128, or 152 bits. (Enter all four keys for the Key Size chosen.)
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
•
WPA-PSK (Preshared Key)
Record the WPA-PSK key. Key: ___________________________________
•
WPA RADIUS Settings. For WPA, record the following settings for the primary and
secondary RADIUS servers:
Server Name/IP Address: Primary _________________
Secondary __________________
Port: ___________________________________
Shared Secret: ___________________________________
Use the procedures described in the following sections to configure the WN604. Store this
information in a safe place.
Configuring the RADIUS Server Settings
You can setup or modify the RADIUS Server settings to compliment Network Authentication
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with
WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server
settings must be configured before completing the Network Authentication security profile (see
“Configuring WPA with RADIUS” on page 3-14
,
“Configuring WPA2 with RADIUS” on
page 3-16
, or
“Configuring WPA and WPA2 with RADIUS” on page 3-17
for specifics on
implementing these security options).
Note:
The RADIUS Server Settings apply to all profiles. They only need to be configured
once per wireless access point.