Oki C5400 Guide: User's, C5400 Series (American English) - Page 132
Windows 95 and NT 4.0 do not support USB; Windows, upgraded from Windows 95 may not support USB.
View all Oki C5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Cannot configure for USB connection. NOTE Windows 95 and NT 4.0 do not support USB; Windows 98 upgraded from Windows 95 may not support USB. Possible cause Remedy USB cable does not meet Use USB cable to specification Ver.1.1. specifications. Interface is disabled. Check that USB interface is set to Enable in the menu (USB MENU → USB → ENABLE). Configuration procedure Configure again from the beginning. was not correctly followed or cancelled. USB cable is disconnected or faulty. Reconnect or try another cable. A USB hub is being used. The printer cannot be used with a USB hub. Connect the printer and computer directly. The USB cable is installed in the Ethernet port. Make sure the USB cable is plugged into the black USB port (1) on the printer: Troubleshooting • 130