Oki C5400 Guide: User's, C5400 Series (American English) - Page 61

Network Menu (continued) Note: Factory default settings are shown in bold. Item Settings Explanation FRAME TYPE AUTO 802.2 802.3 ETHERNET II SNAP Selects the Ethernet MAC layer frame type. IP ADDRESS AUTO SET MANUAL Change this to Manual to specify the IP address through the front panel.(see next entry) Required for non-DHCP networks. IP ADDRESS xxx.xxx.xxx.xxx Default = 192.168.100.100 Current assigned IP address. To change: • Press ENTER. • Use +/- keys to increment first octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment second octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment third octet. • Press ENTER to move on to the last octet. • Use +/- keys to increment 1st octet. • Press ENTER to register the new address. SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To Default = change, proceed as above. 255.255.255.000 GATEWAY ADDRESS xxx.xxx.xxx.xxx Current assigned gateway address. To Default = change, proceed as above. 192.168.100.254 INITIALIZE NIC? [EXECUTE] Initializes the network card. WEB/IPP ENABLE DISABLE Enables or disables Web config. facility and Internet Printing Protocol. This item will not appear in the menu if TCP/IP is set to DISABLE. Menu Functions • 59