Oki C5400 Guide: User's, C5400 Series (American English) - Page 64

System Adjust Menu Note: Factory default settings are shown in bold. Item Settings Explanation X ADJUST -2.00MILLIMETER TO Adjusts overall print position +2.00MILLIMETER horizontally in 0.25 Default = 0.00 increments. Y ADJUST -2.00MILLIMETER TO Adjusts overall print position +2.00MILLIMETER vertically in 0.25 increments. Default = 0.00 DUPLEX X ADJUST -2.00MILLIMETER TO Adjusts overall print position +2.00MILLIMETER of print face horizontally in Default = 0.00 0.25 increments. DUPLEX Y ADJUST -2.00MILLIMETER TO Adjusts overall print position +2.00MILLIMETER of print face vertically in 0.25 Default = 0.00 increments. PCL TRAY2 ID# 1 to 59 Default = 20 Appears only if the optional Second Paper Tray (see "Second Paper Tray" on page 138) is installed. Sets Tray 2 number for the PCL emulation. PCL MP TRAY ID# 1 to59; Default = 4 Sets MP tray number for PCL emulation. DRUM CLEANING OFF ON If you are experiencing horizontal white lines on your printed pages, enter the menu and temporarily change this setting to ON, then send a one page print job. This will cause an extra blank sheet to print, cleaning the drum prior to printing. Careful! Leaving this set to ON will reduce the image drum life. Menu Functions • 62