Olympus SP-810UZ SP-810UZ Instruction Manual (English) - Page 59

Appendix Camera care Exterior • Wipe gently with a soft cloth. If the camera is very dirty, soak the cloth in mild soapy water and wring well. Wipe the camera with the damp cloth and then dry it with a dry cloth. If you have used the camera at the beach, use a cloth soaked in clean water and wrung well. Monitor • Wipe gently with a soft cloth. Lens • Blow dust off the lens with a commercial blower, then wipe gently with a lens cleaner. Do not use strong solvents such as benzene or alcohol, or chemically treated cloth. Mold may form on the lens surface if the lens is left dirty. Battery/USB-AC adapter • Wipe gently with a soft, dry cloth. Storage • When storing the camera for extended periods, remove the battery, USB-AC adapter and card, and keep in a cool, dry place that is well ventilated. • Periodically insert the battery and test the camera functions. Avoid leaving the camera in places where chemical products are handled since this may result in corrosion. Battery and USB-AC adapter • This camera uses one Olympus lithium ion battery (LI-50B). No other type of batteries can be used. Caution: There is a risk of explosion if the battery is replaced with the incorrect battery type. Dispose of the used battery following the instructions. (p. 66) • Power consumption by the camera varies depending on which functions are used. • During the conditions described below, power is consumed continuously and the battery becomes exhausted quickly. • The zoom is used repeatedly. • The shutter button is pressed halfway repeatedly in shooting mode, activating the auto focus. • A picture is displayed on the monitor for an extended period of time. • The camera is connected to a printer. • Using an exhausted battery may cause the camera to turn off without displaying the battery level warning. • The included USB-AC adapter F-2AC is designed to be used only with this camera. Other cameras cannot be charged with this USB-AC adapter. • Do not connect the included USB-AC adapter F-2AC to equipment other than this camera. • For plug-in type USB-AC adapter: The included USB-AC adapter F-2AC is intended to be correctly orientated in a vertical or floor mount position. Using a separately sold AC adapter The USB-AC adapter F-3AC (sold separately) can be used with this camera. Do not use any AC adapter other than the dedicated one. When using F-3AC, be sure to use the USB cable included with this camera. Do not use any other AC adapter with this camera. Using a separately sold charger A charger (LI-50C: sold separately) can be used to charge the battery. EN 59