Olympus WS-801 WS-801 Detailed Instructions (English) - Page 17
Connecting the USB-type AC, adapter optional to charge
View all Olympus WS-801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Power supply Power supply The charging time depends on the amount of remaining power and the state of the battery. Connecting the USB-type AC adapter (optional) to charge For WS-803, WS-802: • Before connecting the AC adapter, switch the USB connection setting to [AC Adapter] (☞ P.73). • Before connecting via USB, exit HOLD mode (☞ P.20). You can charge the recorder by connecting it to the USB-type AC adapter (A514) (optional). 1 Plug the recorder into the AC adapter's USB port. 3 Press the `OK button to start charging. 1 • While [Press OK to start charging] is flashing, press the `OK button. 4 Charging is completed when [Battery full] is displayed. To the USB-type AC adapter's (A514) USB connector 2 Plug the AC adapter into the AC outlet. To the AC outlet Notes • The recorder cannot be charged if the PC is not turned on, or if the PC is in standby, hibernate, or sleep mode. • Do not charge the recorder with the USB hub connected. • Insert the supplied rechargeable battery and set [Battery] to [Ni-MH]. If [Battery] is set to [Alkaline], you cannot recharge (☞ P.15, P.65). • You cannot charge the battery if [ ]*1 or [ ]*2 is blinking. Charge the battery at a temperature in the range of 5°C to 35°C (41°F to 95°F). *1 [ ]: The surrounding temperature is too low. *2 [ ]: The surrounding temperature is too high. • When the recorder's operating time becomes notably shorter even after EN the battery is fully charged, replace the battery with a new one. 17