Olympus WS-801 WS-801 Detailed Instructions (English) - Page 86
Symptom, Probable cause, Action
View all Olympus WS-801 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Troubleshooting Symptom Recording level too high Voice files are not recorded in stereo Probable cause WS-803 only: The recording level has not been adjusted. This could potentially be because the recording level and output level for connected external devices is too high. The connected external microphone is monaural. [Rec Mode] is set to a monaural recording mode. WS-803 only: Action Adjust the recording level and then try recording once more (☞ P.56). If you cannot record clearly even after adjusting the recording level, then adjust the output level for the connected devices (☞ P.56). When an external monaural microphone is connected for recording audio, audio is recorded to the L channel only. Set [Rec Mode] to the stereo recording mode (☞ P.56). [Zoom Mic] is set to the + side. Set [Zoom Mic] to [Off] (☞ P.57). Cannot find the recorded Voice File Wrong folder. Switch to the correct folder (☞ P.26 to P.28). The recorder was shaken during recording. --- Noise heard during 7 playback The recorder was placed near a cell phone or fluorescent lamp while Move the recorder. recording or during playback. WS-803, WS-802 only: Silent portions not skipped during playback The [Voice Detect] process has not been performed. [Voice Playback] is set to [Off]. Extract voice portions using [Voice Detect]. Set [Voice Playback] to [On]. Unable to erase the file Unable to erase the folder The file is locked. Unlock the file (☞ P.55). The file is read-only. Unlock the file or cancel the file's readonly setting on the PC. The folder contains a file which cannot Connect the recorder to your PC and be recognized by the recorder. erase the folder (☞ P.79). Troubleshooting EN 86