Panasonic AG-HMC80PJ User Manual - Page 107
SW&DISP SETUP screen, Description of settings
View all Panasonic AG-HMC80PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Chapter 3: Screen displays and setting menus SW&DISP SETUP screen Item HANDLE ZOOM IRIS DIAL USER1 SW USER2 SW USER3 SW INDICATOR (AVCHD mode only) FOCUS ASSIST SW RING SW Display mode CAMERA PHOTO CAMERA PHOTO CAMERA PHOTO DV IN PB CAMERA PHOTO DV IN PB CAMERA PHOTO DV IN PB PB CAMERA PHOTO CAMERA PHOTO Description of settings Sets the speed allocated to the handle zoom switch. L/OFF/H: 1 - (low-speed); 2 - (speed adjustment OFF); 3 - (high-speed) L/M/H: 1 - (low-speed); 2 - (medium-speed); 3 - (high-speed) L/OFF/M: 1 - (low-speed); 2 - (speed adjustment OFF); 3 - (medium-speed) Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL IRIS mode) DOWN OPEN: The iris opens when the IRIS dial is turned downward. UP OPEN: The iris opens when the IRIS dial is turned upward. Selects the function assigned to the USER1 button. INH: No function assigned. (PUSH)AF: Switches to auto focus mode when the button is held during manual focus mode. BACKLIGHT: Auto iris control for the backlight compensation. (Pages 12, 61) SPOTLIGHT: Switches auto iris control for the spotlight on or off. BLACKFADE: Blackfade (Pages 12, 61) WHITEFADE: Whitefade (Pages 12, 61) ATW: Switches the ATW function on or off. ATW LOCK: Fixes the white balance value when the button is pressed during ATW. Press again to perform ATW. HIGH GAIN: The gain mode switches between normal and high with each press of the button. Gain can be set to up to 34 dB in high gain mode. This does not work in PHOTO mode. (Pages 6, 55) D.ZOOM: Changes the ratio of the DIGITAL ZOOM function. Each press of the button changes the ratio in the following order: OFF (x1) → x2 → x5 → x10 → OFF (x1). (Page 39 of Vol.1) EVF DTL: Emphasizes outlines of images in the viewfinder for easier focusing when the button is pressed. SHOT MARK: Shot mark recording (Pages 49, 85) LAST CLIP: Deletes the last recorded clip. (Pages 14, 63) WFM: Displays a waveform (only on the viewfinder during CAMERA mode). Assigns a function to the USER2 button. The setting contents are the same as USER1 SW. BACKLIGHT Assigns a function to the USER3 button. The setting contents are the same as USER1 SW. SHOT MARK Selects whether to display the thumbnail indicator. ON: Displayed OFF: Not displayed Assigns a function to the FOCUS ASSIST button. EXPANDED: Displays the center of the screen in expanded view. BAR: A bar extends to the right as focus is aligned. BOTH: Enables both expanded view and focus bar display. Assigns a function to the RING switch. ZOOM: Switch between FOCUS and ZOOM. IRIS: Switch between FOCUS and IRIS. indicates the factory setting. 107