Panasonic AG-HMC80PJ User Manual - Page 117
Playback, PC connection, Other, The SD Memory Card is
View all Panasonic AG-HMC80PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Chapter 4: Reference Playback Cannot hear any sound from the camera-recorder's speaker. • You may have turned down the camera-recorder's volume control too far. Adjust the sound volume with the MONITOR LEVEL knob. Page 21 of Vol.1 PC connection Computer does not recognize camera when USB connection cable is connected. An error message appears on the computer when the USB connection cable is disconnected. • Check that the camera is in AVCHD mode. • If your computer has multiple USB terminals, please try connecting the camera to a different USB terminal. • Switch the camera's power off and back on again, and reconnect the USB connection cable. • To disconnect the USB connection cable safely, double-click the icon in the task tray, and follow the instructions on the screen. Page 51 - Other The remote control does not work. There is a rattling sound when the camera-recorder is tilted back and forth. A clicking sound is heard when the power is turned on or when the PB mode is switched to the CAM mode. The SD Memory Card screen appears strange. The SD Memory Card cannot be used even after formatting. The camera does not recognize the SD Memory Card even though it is inserted correctly. The SD Memory Card is not recognized when inserted into other devices. • The battery in the remote control may have run out. If the remote control fails to work even if it is operated close to the remote control sensor of the camera-recorder, it means that the battery has run out. Replace it with new one. • Check that the IR REMOTE item in the setting menu OTHER FUNCTIONS screen is not set to OFF. • This is the sound of the lens moving. This is not a fault. No sound should be heard when the camera's power is switched on. • This initialization operation is performed when the camera starts up. It occurs due to the construction of the camera and is not indicative of any trouble. • The data on the card could be corrupted. Data can be corrupted by static electricity and electromagnetic waves. Please always save important data to a computer or other storage media. • There could be a fault with the camera or with the SD Memory Card. Please consult the place of purchase. Always use only SD Memory Cards of 512 MB - 32 GB with this camera. • Was the inserted SD Memory Card originally formatted with a computer? Always use this camera to format SD Memory Cards. Please be aware that, when an SD Memory Card is formatted, all data recorded on the card will be erased and will not be restorable. • Please check that the device is compatible with the capacity or type (SD Memory Card/SDHC Memory Card) of the SD Memory Card that you are using. For details, please consult the device's own operating instructions. Page 29 of Vol.1 - - - - Pages 28, 76 Page 14 of Vol.1 117