Panasonic AG-HMC80PJ User Manual - Page 24
Selecting the USER CLIP NAME recording method, Clip metadata continued
View all Panasonic AG-HMC80PJ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Chapter 1: Operations in AVCHD mode Clip metadata (continued) 4 Press the up or down button of the cursor button to switch pages, select META CARD READ, and press the ENTER button. META INITIAL SET: Select this to initialize the metadata which has been recorded in the unit. Select YES and press the ENTER button to initialize. 5 Press the MENU button to release the menu mode. META CARD READ: Read metadata set to the SD Memory Card with the camera. � Up to 8 metadata files stored on the SD Memory Card (MTDT00 to MTDT07) are displayed in a list. Files with no corresponding data are displayed in gray. � When you select the file you want to read by pressing the ENTER button, a confirmation message appears. Select YES and press the ENTER button to read the metadata. META DATA REC: Select this to set whether to record the metadata to be loaded into the unit simultaneously on the SD Memory Card. Select ON and press the ENTER button to set metadata recording. The META icon appears on the LCD monitor. The factory setting for this mode is OFF. USER CLIP NAME: The USER CLIP NAME recording method is selectable. For details, see "Selecting the USER CLIP NAME recording method". META DATA PROP: Select this to display metadata that has been loaded to the unit. CLIP COUNTER RST: Reset the COUNT value to 1. Select YES and press the ENTER button to reset. Selecting the USER CLIP NAME recording method You can set the recording method for USER CLIP NAME by selecting the USER CLIP NAME item in the setting menu RECORD SETUP screen and then pressing the ENTER button. The TYPE1 and TYPE2 options are available for selection. USER CLIP NAME to be recorded TYPE1 TYPE2 If clip metadata has Uploaded been read in data If no clip metadata has been read in or if the setting for recording clip metadata has been turned off Sequential 5digit number, in order of recording Uploaded data + COUNT value* Sequential 5digit number, in order of recording * The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method. The COUNT value can be reset using the following procedure. Select YES for the CLIP COUNTER RST item in the setting menu RECORD SETUP screen, and then press the ENTER button to reset the COUNT value to 1. 24