Panasonic BT-LH2170 Operating Instructions - Page 14
Power supply, Connecting the power cable
View all Panasonic BT-LH2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Power supply Connecting the power cable 1. Attach the power cable to the unit. When using external DC power (12 V DC) You can slide open the power cover to switch from AC input to external DC input. Power cover Power cable 2. Connect the power cable to the power outlet. • If the power cover has come off or been removed, do not use the monitor with the power supply connected to both AC input and DC input terminals. • Use a shielded DC cable that is not longer than 2 m. A cable that is 2 m or longer may cause screen noise. Before using an external DC power supply, be sure to check that the rating of the external DC power supply suits the power requirements of this monitor. Check the pin arrangements of the DC output terminal of the external DC power supply and those of the DC IN socket of this monitor to ensure that a connection will maintain the correct polarity. If +12 V is accidentally connected the GND terminal, fire or injury could result. 1 4 23 External DC input terminal Pin number 1 2, 3 4 Signal GND ― +12 V 14