Panasonic BT-LH2170 Operating Instructions - Page 48
CONTROL, HOURS METER, continued, Submenu, Setting, Description, LOCAL ENABLE, PROTOCOL VER.
View all Panasonic BT-LH2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Main Menu (continued) CONTROL Submenu CONTROL Setting LOCAL REMOTE LOCAL ENABLE *1 DISABLE INPUT FUNCTION INPUT+FUNC. PROTOCOL VER.*2 RS-485 ID SETUP RS-485 STX&ETX V3.1 V4.0 0 to 126 (Factory default setting: 0) OFF ON Underlined values indicate factory defaults. Description Selects operation. (with control lock) [LOCAL] Front panel operation is enabled (including controls that use the GPI function) [REMOTE] Remote operation enabled (controls using RS-232C or RS-485. Front panel operation is locked) • Power On/Off, VOLUME operations, GPI control and menu dis- play are available when the lock is engaged. • Only [CONTROL]/[LOCAL ENABLE] menu items are available when the lock is engaged. • The rotary knob cannot be used to change set val- ues when the lock is engaged. • The [LOCAL ENABLE] setting determines operations in lock mode. • The mark appears in the operation status display, menu display ([MAIN MENU] (main menu), [FUNCTION] menu, [IN- PUT SELECT] menu), [PICTURE] (picture adjusting) menu, and FUNCTION display screens when the lock is engaged. [MARKER] MARKER OFF Mark 16:9 4:3 4:3 OFF Selects whether to BeAnCaKble or disable and button operations wCChEReNOnTSES[RREMOTE] is selecOOteFFdFF under [CONTROL]. [DISABLE] DGisCPaOIbLlOMeRAsRT9E)and button opGPeIratMioAnRsK.ER2 95%(16:9) [INPUT] EnMEaNUbElXeITs N REbTUuRNtton operations. [FUNCTION] Enables button operations. [INPUT+FUNC.] E nables and button operations. Selects version of the TSL protocol. Sets the monitor ID number to use RS-485 communication. Select RS-485 interface command format (→page 63). [OFF] STX and ETX need not be placed. [ON] STX and ETX must be placed. *1 Only available when [REMOTE] is selected under [CONTROL]. *2 The monitor supports version 3.1 and 4.0 of the TSL UMD PROTOCOL provided by Television System LTD. HOURS METER Submenu OPERATION LCD Setting xxxxxxh *1 xxxxxxh *1 Description Displays the total number of hours it has been on. Displays the number of hours that the backlight has been on. *1 "xxxxxx" indicates up to 262800 hours (about 30 years). [OVER] is indicated when the number of hours is 262800 or higher. 48