Panasonic BT-LH2170 Operating Instructions - Page 65

REMOTE Specifications (continued) No Send commands Command name Data Return 40 MWC: TWO WINDOW 0:SINGLE 1:TWO M/M MWC 41 DWM: WFM/VECTOR 0:OFF 1:WFM Y ON 2:WFM R ON 3:WFM G ON 4:WFM B ON 5:VECTOR ON DWM 42 VWB:RGN WHITE BALANCE (R GAIN) 0 to 1023 RED GAIN setting VWB 43 VWB:GGN WHITE BALANCE (G GAIN) 0 to 1023 GREEN GAIN setting VWB 44 VWB:BGN WHITE BALANCE (B GAIN) 0 to 1023 BLUE GAIN setting VWB 45 VWB:RBS WHITE BALANCE (R BIAS) 0 to 1023 RED BIAS setting -512 to 511 VWB 46 VWB:GBS WHITE BALANCE (G BIAS) 0 to 1023 GREEN BIAS setting-512 to 511 VWB 47 VWB:BBS WHITE BALANCE (B BIAS) 0 to 1023 BLUE BIAS setting-512 to 511 VWB 48 MPP: PIXEL TO PIXEL 0:OFF 1:ON MPP 49 DPO: PIXEL POSITION 0:CENTER 1:LEFT 2:RIGHT DPO 50 MFR: FOCUS IN RED 0:OFF 1:ON MFR 51 DLM: LEVEL METER 0:OFF 1:2CH 2:4CH 3:8CH DLM 52 DTM: TIME CODE 0:OFF 1:LTC 2:VITC 3:LUB 4:VUB 5:LTC+LUB 6:VITC+VUB DTM 53 MCC:*1 CLOSED CAPTION 00:OFF 01:CC1(CEA-608(VBI)) 02:CC2(CEA-608(VBI)) 03:CC3(CEA-608(VBI)) 04:CC4(CEA-608(VBI)) 05:SRV1(CEA-708) 06:SRV2(CEA-708) 07:SRV3(CEA-708) 08:SRV4(CEA-708) 09:SRV5(CEA-708) 10:SRV6(CEA-708) 11:OP-42 12:OP-47 13:CC1(CEA-608(ANC)) 14:CC2(CEA-608(ANC)) 15:CC3(CEA-608(ANC)) 16:CC4(CEA-608(ANC)) 17:CC1(CEA-608(708)) 18:CC2(CEA-608(708)) 19:CC3(CEA-608(708)) 20:CC4(CEA-608(708)) MCC 54 MAN: ANAMO 0:OFF 1:ON MAN 55 OYM: Y MAP 0:OFF 1:ON OYM 56 OPA:*2 57 ORC: PICTURE ASSIST R COLOR 0:OFF 1:ON 0:OFF 1:ON OPA ORC 58 OGC: G COLOR 0:OFF 1:ON OGC 59 OBC: B COLOR 0:OFF 1:ON OBC 60 DIS:WVP WFM/VECTOR POSITION 0:RT 1:RB 2:LB 3:LT DIS 61 DIS:VMO VECTOR MODE 0:x1 1:x2S 2:x2 3:x4 4:x8 DIS 62 DIS:VSC VECTOR SCALE 0:100 % 1:75 % DIS 63 DIS:TMP TIMECODE POSITION 0:TOP 1:RIGHT 2:CENTER 3: LEFT DIS 64 DIS:TFS TIMECODE FONT SIZE 0:LARGE 1:SMALL DIS 65 DIS:IMD IN MONITOR DISPLAY 0:OFF 1:ON DIS 66 DIS:IMP IN MONITOR DISPLAY 0:TOP 1:BOTTOM DIS POSITION 67 DIS:IMC IN MONITOR DISPLAY 0: CMD (RS-485 setting) 1: WHITE 2: BLUE DIS CHAR. COLOR 3:GREEN 4:YELLOW 5:CYAN 6:RED 7:GRAY 8:MAGENTA 68 DIS:IMV IN MONITOR DISPLAY 0:Ver3.1 1:Ver4.0 DIS VERSION 69 AUD:IIS INPUT SELECT 0:AUTO 1:ANALOG AUD 70 AUD:GSL GROUP SELECT 0:1 to 8 1:9 to 16 AUD 71 AUD:ISL SELECT L 0:1ch/9ch 1:2ch/10ch 2:3ch/11ch 3:4ch/12ch AUD 4:5ch/13ch 5:6ch/14ch 6:7ch/15ch 7:8ch/16ch *1 Configures settings for the [CLOSED CAPTION], [CC TYPE], [CAPTION CHANNEL], [CAPTION SERVICE] menu items under [DISPLAY SETUP] simultaneously. *2 In 2-screen ([SUB WINDOW], [TWO WINDOW], [PICTURE ASSIST]) commands, a command input when another mode goes on changes priority to the input mode. (A switch to SINGLE, switches the monitor to single screen display.) 65