Panasonic BT-LH2170 Operating Instructions - Page 52

3D Assist Mode (continued) COLOR (Color Check) This function overlays and displays the SDI1 (L) image and SDI2 (R) image on a checkerboard pattern in one screen to enable you to check the brightness offset and color differences Screen: Overlay L/R on one screen. [3D ASSIST] COLOR SIZE 256 When it is easy to see the borderline of the checkerboard pattern, the brightness or color of L/R images is offset. MENU EXIT RETURN RETURN Menu SIZE Setting 128 256 Underlined values indicate factory defaults. Description Selects the checkerboard grid size when overlaying the SDI1 (L) side and SDI2 (R) side images. [128] The checkerboard grid consists of squares of 128 samples and 128 lines. [256] The checkerboard grid consists of squares of 256 samples and 256 lines. ZOOM FOCUS (Zoom and Focus Check) This function enlarges part of an image to enable you to check left and right focus offset and zoom offset. Screen: The L/R 2 screens are shown side-by-side. [3D ASSIST] ZOOM FOCUS ZOOM OFF F-IN-R OFF LEVEL 30 MENU EXIT RETURN RETURN Expanding the parts that are not in focus makes it easy to check the focus of the left and right cameras. Menu ZOOM F-IN-R LEVEL OFF C L R Setting OFF ON 1 to 30 (Factory default setting: 15) Underlined values indicate factory defaults. Description Selects image enlargement and the signal display position of the enlarged image (PIXEL TO PIXEL). [OFF] Displays two screens side-by-side [C] Center of screen [L] Left of screen [R] Right of screen Turns OFF/ON the FOCUS-IN-RED function in the displayed screen. [OFF] Turns the function off. [ON] Turns the function on Adjusts the detection sensitivity of FOCUS-IN-RED. (The numerical value turns green when sensitivity adjustment can be made.) A higher numerical value results in lower detection sensitivity (lack of sharpness). [1] to [30] Common left and right detection level 52