Panasonic BT-LH2170 Operating Instructions - Page 30
System Config, Power On Setup
View all Panasonic BT-LH2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Main Menu (continued) SYSTEM CONFIG Submenu SUB WINDOW Setting FULL PART MENU POSITION STATUS DISPLAY CENTER LT RT RB LB OFF 3SEC OFF CONTINUE INPUT NAME SETUP SETUP LOAD SETUP SAVE POWER ON SETUP COLOR SPACE POWER DOWN ▼ FACTORY USER1 *3 USER2 *3 USER3 *3 USER4 *3 USER5 *3 USER1 USER2 USER3 USER4 USER5 LAST FACTORY USER1 USER2 USER3 USER4 USER5 SMPTE-C *4 EBU *5 ITU-709 *6 OFF ON POWER SAVE MODE OFF ON CALIBRATION ▼ Underlined values indicate factory defaults. Description Selects sub-window type of the SUB WINDOW function. [FULL] Reduces the entire input signal screen and turns it into two screens that are displayed side by side. [PART] Removes the center portion of the input signal screen and turns it into two screens that are placed side by side. (The center portion is displayed at its original size) Positions the on-screen menu. [CENTER] Center of screen [LT] Top left [RT] Top right [RB] Bottom right [LB] Bottom left Determines how operating status (→page 16) is displayed. [OFF] Not displayed. [3SEC OFF] Displayed for approx.3 seconds after a status change. *1 [CONTINUE] Displayed at all times. Changes the names of displayed input terminals in status display screens. *2 Loads saved factory defaults ([FACTORY]) or user data ([USER1] to [USER5]).(→page 22) After loading user data, the screen displays the signal selected before user data was loaded. Up to 5 sets of user data can be saved.(→page 22) Adjustment values made with the rotary knob and menu settings, except [SETUP SAVE]/[SETUP LOAD] can be saved. Selects the settings used when the power is turned on. [LAST] Starts in the mode used when the power was last turned off. [FACTORY] Starts up using the factory defaults. [USER1] to [USER5] Starts up using USER registered settings. Sets the studio standard color shade. Determines whether or not the power will be turned off (powered down) when there is no signal input and the monitor has been idle for a certain period of time. [OFF] The monitor is not powered down. [ON] The monitor is powered down. Sets the power save mode [OFF] POWER SAVE MODE is not engaged. [ON] The backlight dims when no signal ([NO SIGNAL]) is input for approx.60 seconds or longer. Signal input or menu operation will return the backlight to its normal brightness. Connect a CA-310 Display color analyzer and use this submenu to make a calibration. This also restores the calibration data to factory defaults.(→pages 32 to 33) *1 In PIXEL TO PIXEL and 3D assist mode, the [3SEC OFF] setting has the same effect as [CONTINUE]. *2 Up to 9 characters can be entered for this monitor. Only alphabetic characters (English), numeric characters and symbols can be used. *3 [USER1] to [USER 5] and [FACTORY] have the same factory defaults. *4 Factory default setting for the BT-LH2170P. *5 Factory default setting for the BT-LH2170E. *6 ITU-709 is an ITU-R BT.709 standard. 30