Panasonic BT-LH2170 Operating Instructions - Page 37

Main Menu (continued) „„Functions displayed during FUNCTION button operation Pressing any of the to buttons displays the operations assigned to each button as shown below. Setting Display HV DELAY [DELAY OFF] → [H DELAY] → [V DELAY] → [HV DELAY] BLUE ONLY [BLUE ONLY OFF]→ [BLUE ONLY ON] GAMMA SELECT [GAMMA STANDARD] → [GAMMA FILM] → [GAMMA STDIO/PST] → [GAMMA CINEMA] SD ASPECT [4:3]→[16:9] SCAN [NORMAL SCAN]→[UNDER SCAN] SUB WINDOW [SINGLE]→[FULL/PART]→[STILL] WFM/VECTOR [WFM/VECTOR OFF]→[WFM Y ON]→[WFM R ON]→[WFM G ON]→[WFM B ON]→ [VECTOR×1/×2S/×2/×4/×8] MARKER [MARKER OFF]→ [4:3 MARKER/13:9MARKER/14:9MARKER/CNSCO2.39 MARKER/CNSCO2.35 MARKER/2:1 MARKER/ VISTA MARKER/95% MARKER/93% MARKER/90% MARKER/88% MARKER/80% MARKER/ xx% MARKER*10 /xx%/yy% MARKER*11 ] *10xx% indicates an 80 to 100% USER setting *11xx%/yy% is the VAR set value for 80 to 100 % aspect ratio • When the set values for both [16:9] and [4:3] are something other than [OFF] in the [MARKER] menu settings, the [16:9] set value is displayed in the first half, and the set value of [4:3] is displayed in the second half. WHITE BALANCE [WHITE BALANCE VAR 1/2/3] PIXEL TO PIXEL [PIXEL TO PIXEL OFF]→[PIXEL TO PIXEL LEFT/CENTER/RIGHT] PIXEL POSITION [PIXEL TO PIXEL LEFT]→[PIXEL TO PIXEL CENTER]→[PIXEL TO PIXEL RIGHT] FOCUS-IN-RED [FOCUS-IN-RED OFF]→[FOCUS-IN-RED ON] LEVEL METER [METER OFF]→[METER 2 CH/4 CH/8 CH] CROSS HATCH [CROSS HATCH OFF]→[CROSS HATCH LOW]→[CROSS HATCH HIGH] MONO [MONO OFF]→[MONO ON] BLACK MODE [BLACK MODE OFF]→[BLACK MODE ON] TIME CODE [TC OFF]→[LTC/VITC/LUB/VUB/LTC+LUB/VITC+VUB] CLOSED CAPTION The displayed items differ depending on the [CC TYPE] selection. When the [CC TYPE] setting is [CEA-608 (ANC)], [CEA-608 (VBI)] or [CEA-608 (708)]: [CC OFF]→[CC1/2/3/4] When the [CC TYPE] setting is [CEA-708]: [CC OFF]→[SRV1/2/3/4/5/6] When the [CC TYPE] setting is [OP-42]: [CC OFF]→[OP-42] When the [CC TYPE] setting is [OP-47]: [CC OFF]→[OP-47] AUDIO MUTE [AUDIO MUTE OFF]→[AUDIO MUTE ON] AUDIO OUT SEL. [SDI1]→[SDI2] ANAMO [ANAMO OFF]→[ANAMO ON] TWO WINDOW [SINGLE]→[TWO M/M] Y MAP [Y MAP OFF]→[Y MAP ON] PICTURE ASSIST [PICTURE ASSIST OFF]→[PICTURE ASSIST ON] R COLOR [R COLOR ON]→[R COLOR OFF] G COLOR [G COLOR ON]→[G COLOR OFF] B COLOR [B COLOR ON]→[B COLOR OFF] ZEBRA [ZEBRA OFF]→[ZEBRA INT.]→[ZEBRA EXT.]→[ZEBRA INT.+EXT.] ZEBRA LEVEL [SETTING] 2D/3D ASSIST [2D]→[3D ASSIST] • [WHITE BALANCE] and [ZEBRA LEVEL] is switched to adjustment mode with a button, and operating status is not displayed. • SUB WINDOW, TWO WINDOW, PICTURE ASSIST of the 2-screen display function are mutually exclusive functions - when one is on, the other two are off. For this reason, when one of the 2-screen display functions is on, the operating status of the function that is on is displayed when a screen is opened using the button. • [CC1/2/3/4] and other [***/***] indications denote set values in relevant menus. 37