Panasonic BT-LH2170 Operating Instructions - Page 24

Main Menu (continued) 2D/3D ASSIST Setting 2D 3D ASSIST Underlined values indicate factory defaults. Description Switches between 2D mode and 3D assist mode. [2D] Operates in 2D mode. [3D ASSIST] Operates in 3D assist mode. When you switch to [3D ASSIST], the input line selection will be force switched to SDI1 or SDI2. MARKER Submenu MARKER 16:9 *2*3 4:3 *2*4 BACK *2 Setting OFF *1 ON OFF 4:3 13:9 14:9 CNSCO 2.39 CNSCO 2.35 2:1 VISTA 95% 93% 90% 88% 80% USER 85% VAR. H. 85% V. 85% OFF 95% 93% 90% 88% 80% USER 85% VAR. H. 85% V. 85% NORMAL HALF BLACK Underlined values indicate factory defaults. Description Selects whether to enable or disable the marker setting. Selects/displays various markers in 16:9 aspect ratio. [OFF] No marker display [4:3] 4:3 marker [13:9] 13:9 marker [14:9] 14:9 marker [CNSCO 2.39] 2.39:1 marker [CNSCO 2.35] 2.35:1 marker [2:1] 2:1 marker [VISTA] VISTA marker [95%] 95 % area marker [93%] 93.1 % area marker (TYPE1) 93 % area marker (TYPE2) [90%] 90 % area marker [88%] 89.5 % area marker (TYPE1) 88 % area marker (TYPE2) [80%] 80 % area marker [USER] An area marker that is adjustable in 1% increments within a range of 80 to 100%. However, when the [MARKER TYPE] is [TYPE1], 88% and 93% indicate area markers whose height area 89.5% and 93.1%, respectively. (The factory default is 85 %.) [VAR.] This area marker can be varied in 1% increments in the range between 80 to 100% separately for vertical and horizontal. (The factory default is 85% for both vertical and horizontal) Selects/displays the marker type for when the angle of view of the displayed image is 4:3. [OFF] No marker display [95%] 95 % area marker [93%] 93 % area marker [90%] 90 % area marker [88%] 89 % area marker (TYPE1) 88 % area marker (TYPE2) [80%] 80 % area marker [USER] An area marker that is adjustable in 1% increments within a range of 80 to 100%. However, when the [MARKER TYPE] is [TYPE1], 88 % indicates an area marker whose height is 89%. (The factory default is 85 %.) [VAR.] This area marker can be varied in 1% increments in the range between 80 to 100% separately for vertical and horizontal. (The factory default is 85% for both vertical and horizontal) Selects the background brightness around the marker. [NORMAL] Normal background [HALF] 50% signal level [BLACK] 0 % signal level (black) *1 This setting is turned [ON] when receiving marker control signals in REMOTE operation. (GPI if set, has priority.) *2 These settings are disabled when the GPI (→page 60) function is used to control the marker setting. *3 These settings are enabled only for HD and SD signal input when [SD ASPECT] is set to [16:9] aspect ratio mode. (→ 28 page "SD ASPECT") *4 These settings are enabled only for SD signal input when [SD ASPECT] is set to [4:3] aspect ratio mode. (→ 28 page "SD ASPECT") 24