Panasonic BT-LH2170 Operating Instructions - Page 71
Error and Warning Information, Maintenance
View all Panasonic BT-LH2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Error and Warning Information If for any reason an error occurs in the monitor, the following indications are made to notify the error or warning. Error and Warning Information Symptom Remedy Warning of drop in external DC input voltage/ LOW VOLTAGE A [LOW VOLTAGE] indication in blue flashes on the screen. This means that the external DC power supply input voltage has dropped to approximately 11.3 V or less. The [LOW VOLTAGE] indication lights red on the screen and the power is turned off approximately 4 seconds later. This means that the external DC power supply input voltage has dropped below approximately 11.0 V. If the monitor has powered down, connect an external DC power supply providing 11.0 V or more and turn the POWER switch ON. Maintenance • Clean the cabinet and LCD panel by gently wiping them with a soft cloth. To remove stubborn soiling, use a cloth dampened in a weak neutral detergent solution and thoroughly wrung out. Then wipe with a dry cloth. Any moisture entering the monitor could damage it. • Never use alcohol, thinner or benzene to clean this monitor. They could discolor the surface and cause the paint to peel. • Do not directly expose the monitor to spray cleaning. Any moisture entering the monitor could damage it. 71