Panasonic BT-LH2170 Operating Instructions - Page 60

REMOTE Specifications This monitor enables remote operation via the GPI input terminal, the RS-232C input terminal or the RS-485 input/output terminal. GPI input terminal GPI screen items correspond to the following terminals. Use the GPI menu to assign functions to each terminal. (→page 43) The functions assigned to each terminal are executed as specified depending on whether GND (pin 5) is short-circuited (ON) or open (OFF). „„Operating conditions Level operation: Operates when GND is short-circuited. Edge operation: Operates when GND changes from open to short-circuited. • When level operation is assigned to more than one terminal, the function operates as long as one of the terminals is short-circuited. • Hold the edge operation for at least 0.2 seconds after the change. GPI input terminal (9 pins) Pin number 1 2 3 4 5 6 7 8 9 Signal GPI1 GPI2 GPI3 GPI4 GND GPI5 GPI6 GPI7 GPI8 Assigned item UNDEF MARKER1 ON/OFF *1 MARKER2 ON/OFF *1 MARKER BACK HALF *2 MARKER BACK BLACK *2 CENTER MARKER CROSS MARKER INPUT SEL. VIDEO INPUT SEL. SDI1 INPUT SEL. SDI2 INPUT SEL. HDMI INPUT SEL. DVI-I INPUT SEL. INT-SG SD ASPECT SCAN R-TALLY *3 G-TALLY *3 MONO GAMMA SEL. FILM GAMMA SEL. STDIO/PST GAMMA SEL. CINEMA Function Undefined (no function assigned) Switches marker display defined in [GPI MARKER1] (→page 25) in the [MARKER] menu. Switches marker display defined in [GPI MARKER2] (→page 25) in the [MARKER] menu. Reduces the brightness of the background outside the marker displayed in [GPI MARKER1] (→page 25) to 50 %. Reduces the brightness of the background outside the marker displayed in [GPI MARKER1] (→page 25) to 0 %. Turns the center marker display on and off. (When other markers are displayed, this marker is superimposed on other markers.) Turns the cross marker display on and off. (When other markers are displayed, this marker is superimposed on other markers.) Switches the input line to VIDEO. Switches the input line to SDI1. Switches the input line to SDI2. Switches the input line to HDMI. Switches the input line to DVI-I. Switches the input line to INT-SG. Sets the aspect ratio for SD signal input. (Disabled during HD signal input) Switches the scan mode between UNDER and NORMAL. Lights the red tally. Lights the green tally. Switches between color and monochrome (MONO). Switches the gamma curve to FILM mode. Switches the gamma curve to STDIO/PST mode. Switches the gamma curve to CINEMA mode. Operating conditions - Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Edge operation Edge operation Edge operation Edge operation Edge operation Edge operation Level operation (short-circuited: 16:9, open: 4:3) Level operation (Short-circuited: UNDER, Open: NORMAL Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: monochrome, Open: color) Level operation (Short-circuited: FILM mode, Open: STANDARD mode) Level operation (Short-circuited: STDIO/ PST mode, Open: STANDARD mode) Level operation (Short-circuited: CINEMA mode, Open: STANDARD mode) *1 When a 16:9 marker and a 4:3 marker are simultaneously selected and activated on a 16:9 aspect ratio display, both markers are displayed. *2 When a 16:9 marker and a 4:3 marker are simultaneously displayed, the background of the marker selected by the 16:9 marker is controlled. *3 When [R-TALLY] and [G-TALLY] simultaneously go on, the tally color changes to amber. 60