Panasonic BT-LH2170 Operating Instructions - Page 44

Main Menu (continued) INPUT SELECT Submenu VIDEO NTSC SETUP DVI-I DIGITAL ANALOG COMPONENT LEVEL RGB-COMP. Setting AUTO NTSC PAL 00 75 DIGITAL ANALOG AUTO VIDEO COMP. YPBPR RGB-COMP. SMPTE B75 B00 ▼ Underlined values indicate factory defaults. Description Used to select the format for VIDEO input.*1 [AUTO] Automatically selects NTSC or PAL. [NTSC] NTSC [PAL] PAL Selects NTSC setup level. [00] Select this when there is no setup signal. [75] Select this when using 7.5 % setup signals. (The monitor internally adjusts the 7.5 % setup level to suit the black level) Selects DVI-I input mode. [DIGITAL] Selects digital input. [ANALOG] Selects analog input. Selects the DVI-I digital input mode. [AUTO] Selects the input mode automatically depending on the input format. [VIDEO] Selects component input. [COMP.] Selects PC input. Selects YPBPR (component) or RGB input mode when DVI-I is set to "ANALOG." [YPBPR] Selects the YPBPR signal. [RGB-COMP.] Selects the PC RGB signal. Selects the YPBPR (component) signal input level of DVI-I analog inputs. [SMPTE] Signal level complies with SMPTE, and PB, PR are 0.7 V [p-p] at 100% chroma. [B75] Select this when connecting a Betacam or similar device with a setup function. (The monitor internally adjusts the 7.5 % setup level to suit the black level) [B00] Select this when connecting a Betacam or similar device without a setup function. Performs analog PC settings. (→ Below "RGB-COMP.") *1 [AUTO] is the factory default, but select an appropriate format when there is risk that the input signal may be contaminated by outside noise. „„RGB-COMP. Selecting [ANALOG.] under [DVI-I] in the [INPUT SELECT] menu and selecting [RGB-COMP.] under [ANALOG] opens the following menu. Underlined values indicate factory defaults. Submenu Setting Description H POSITION 0 to 60 (Factory default setting: 30) Adjusts horizontal image display position in 2-clock units. *2 V POSITION 0 to 15 (Factory default setting: 8) Adjusts vertical image display position. *2 PHASE 0 to 31 (Factory default setting: 16) Adjusts the clock phase in 1/32 clock period increments. *2 CLOCK RESET 700 to 2200 (Factory default setting*3) Adjusts the sampling clock in 2-clock units. *2 *4 Returns [H POSITION], [V-POSITION], [PHASE] and [CLOCK] settings in the RGB-COMP. input compliant format to their factory defaults. *2 Each compatible input format can be adjusted, but not when user data is loaded (→page 30 "SETUP LOAD") or saved (→page 30 "SETUP SAVE") . *3 [CLOCK] factory default values Format CLOCK Format CLOCK 640×480 (60 Hz) 800 1280×768 (60 Hz) 1664 800×600 (60 Hz) 1056 1280×1024 (60 Hz) 1688 1024×768 (60 Hz) 1344 *4 This menu is disabled when the input signal format is 1920 x 1080 (60 Hz). 44