Panasonic BT-LH2170 Operating Instructions - Page 72
Specifications
View all Panasonic BT-LH2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Specifications General Power input Power supply voltage Current consumption AC : 100 V - 240 V, 50/60 Hz 0.55 A - 0.25 A DC : 12 V (11 V - 17 V) 3.8 A indicates safety information. Dimensions (W x H x D): 510 mm×388 mm×198 mm ( 20-1/16 inches x 15-1/4 inches x 7-13/16 inches) (including stand 510 mm×373 mm×72 mm ( 20-1/16 inches x 14-5/8 inches x 2-13/16 inches) (monitor only, not including stand) Mass: 7.0 kg (15.43 lb) (including stand 6.1 kg (13.45 lb) (monitor only, not including stand) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) Operating humidity: 20 % to 80 % (no condensation) Storage temperature: - 20 °C to 60 °C (-4 °F to 140 °F) Display panel Dimensions: Aspect ratio: Number of pixels: Display colors: View angle (contrast > 10:1): 54.6 cm (21.5 inchs) (effective screen area) 16:9 1920 x 1080 (Full HD) Approx. 16,700,000 colors 178° left/right, 178° up/down Input/output Connectors VIDEO input: BNC x 1 SDI input: BNC x 2 SMPTE ST 424, 274, 296, 259, ITU-R BT.656-4 compliant EMBEDDED AUDIO supported 3G-SDI: SMPTE ST 299 compliant 48 kHz, synchronous supported 16 channels supported HD-SDI: SMPTE ST 299 compliant 48 kHz, synchronous compatible 8 channels supported SD-SDI: SMPTE ST 272 compliant 48 kHz, synchronous compatible 4 channels supported HDMI input: HDMI terminal x 1 (Type A terminal HDCP supported EMBEDDED AUDIO supported VIERA Link not supported DVI-I input: DVI-I, 29-pin plug x 1 single link HDCP supported AUDIO input: Pin jack x 2 (stereo Input signal level: 0.31 Vrms VIDEO output (through-out): BNC x 1 SDI output (active through-out): BNC×2 GPI: D-SUB, 9 pins x 1 RS-232C: D-SUB, 9 pins x 1 RS-485: RJ-45 x 2 (input, output) Headphones: Stereo mini jack M3 x 1, 32 Ω, level adjustable Other Input/output connectors Speaker output: Monaural 0.5 W Tally output (display): Red, green, amber Weight and dimensions are approximate. Inrush current, measured according to European standard EN 55103-1: 8 A 72