Panasonic BT-LH2170 Operating Instructions - Page 51

3D Assist Mode (continued) COMPARISON (Composition Check) This function is for checking when the subject is captured with only the camera of one side. Screen: The L/R 2 screens are shown side-by-side or arranged vertically and a 70 % size half-tone marker is shown inside each of the images. [3D ASSIST] COMPARISON SBYS MENU EXIT RETURN RETURN When there is only a left-eye or a right-eye image, discomfort will be felt in 3D mode and make stereoscopic vision difficult. Perform a comparison to check what part of the images are outside the markers. Menu COMPARISON SBYS T&B Setting Underlined values indicate factory defaults. Description [SBYS] The SDI1 (L) image appears on the left side and the SDI2 (R) image appears on the right side. [T&B] The SDI1 (L) image appears at the top and the SDI2 (R) image appears at the bottom. CONVERGENCE (Convergence Check) This function is for checking the subject's position at a fixed screen position in order to determine the depth position of the main subject. Automatically or manually switch the SDI1 (L) image and SDI2 (R) image and then check the subject's position. Screen: Normal display of one screen [3D ASSIST] CONVERGENCE MANUAL MANUAL L SPEED SLOW MENU EXIT RETURN RETURN • The place at which the image does not change is the conver- gence point. • When the camera adjustment (vertical or rotation direction position adjustment) is correct, the image at other than the convergence point will shift to the left/right target. Menu CONVERGENCE MANUAL SPEED Setting MANUAL AUTO L R SLOW FAST Underlined values indicate factory defaults. Description Selects how the images on SDI1 (L) side and the SDI2 (R) side are switched. [MANUAL] Manual switching [AUTO] Automatic switching Selects the image to display when [CONVERGENCE] is set to [MANUAL]. [L] SDI1 (L) side image [R] SDI2 (R) side image Selects the speed when [CONVERGENCE] is set to [AUTO]. [SLOW] Every 1 second [FAST] Every 4 frames (at 720P: Every 8 frames) 51