Panasonic BT-LH2170 Operating Instructions - Page 29

Main Menu (continued) „„WB (WHITE BALANCE) adjustment mode Select [VAR1] to [VAR3] for [COLOR TEMP.] in the [VIDEO CONFIG] menu to make WHITE BALANCE VAR1 to WHITE BALANCE VAR3 adjustments. Underlined values indicate factory defaults. Submenu Setting Description COLOR TEMP.*10 USER 0 to 63 D93 D65 D56 Selects the color temperature that will become the basis for adjustment. [USER 0 to 63] A djustable settings 0 to 63 (equivalent to a color temperature range of 3,000 K to 9,300 K) [D93] Equivalent to a color temperature of 9,300 K [D65] Equivalent to a color temperature of 6,500K [D56] Equivalent to a color temperature of 5,600 K GAIN ▼ Adjusts the GAIN elements Press the rotary knob to switch to RGB direct adjustment mode. (This allows you to begin adjusting GAIN first.) RED GREEN BLUE 0 to 1023 (A color temperature of [D65] is the factory default value.) • This is a factory default adjustment. Displays the GAIN elements for RED. (For numerical value confirmation) Displays the GAIN elements for GREEN. (For numerical value confirmation) Displays the GAIN elements for BLUE. (For numerical value confirmation) BIAS ▼ Adjusts the BIAS elements Press the rotary knob to switch to RGB direct adjustment mode. (This allows you to begin adjusting BIAS first.) RED GREEN BLUE - 512 to 511 (Factory default setting: 0) Displays the BIAS elements for RED. (For numerical value confirmation) Displays the BIAS elements for GREEN. (For numerical value confirmation) Displays the BIAS elements for BLUE. (For numerical value confirmation) RESET ▼ Resets [GAIN] (RED/GREEN/BLUE) and [BIAS] (RED/GREEN/BLUE) set values to color temperature values selected under [COLOR TEMP.]. *10Selecting [COLOR TEMP.] and pressing the rotary knob after selecting an item, opens a confirmation screen. When you select [YES] and press the rotary knob in this screen, the selected GAIN and BIAS values are reset to the selected color temperature values. „„Direct adjustment mode Press the rotary knob when a [GAIN], [BIAS] or ZEBRA LEVEL item is selected in the WHITE BALANCE VAR (1 to 3) menu, to switch to the adjusting screen and use the rotary knob to directly adjust the picture while checking the screen. When [WHITE BALANCE] and [ZEBRA LEVEL] are assigned to FUNCTION1 to FUNCTION5, you can access them using the buttons or the [FUNCTION] menu. ●●WB adjustment screen ●●Operation procedure 1. Turn the rotary knob left or right to select an item to change and press the rotary knob . 2. Turn the rotary knob left or right to make changes. • Press the rotary knob to confirm the adjusted values. 995 1012 1023 0 0 0 RETURN RETURN R.GAIN G.GAIN B.GAIN R.BIAS G.BIAS B.BIAS MENU EXIT ●●ZEBRA LEVEL adjustment screen • Press the button in this adjusting screen to return to a normal screen without a menu. *11 When the button is pressed before the values are confirmed, they will not be confirmed. • Pressing in this adjusting screen will return you to the previous cusor and screen. When the is pressed before the values are confirmed, they will not be confirmed. [INT. ] 70% MIN. 85% MAX. [EXT. ] 5% 100% RETURN RETURN MIN. MAX. MENU EXIT • The above two screens cannot be recalled by using the button to access [RETURN]. *11A transition to the previous menu is also made if the monitor is left idle for 10 seconds. However, when called using a button, a normal screen without a menu reappears. 29