Panasonic BT-LH2170 Operating Instructions - Page 61
continued, Assigned item, Function, Operating conditions, PIXEL TO PIXEL, FOCUS-IN-RED, ZEBRA
View all Panasonic BT-LH2170 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
REMOTE Specifications (continued) Assigned item PIXEL TO PIXEL FOCUS-IN-RED ZEBRA REMOTE STANDBY *4*5 Function Switches screen display between input size and display size. Displays the outlines of the subject that are in focus in red Superimposes the ZEBRA pattern over an area of the image with a specified brightness signal level. Sets REMOTE STANDBY (the backlight is turned off). Operating conditions Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) Level operation (Short-circuited: ON, Open: OFF) *4 When remote standby is set to ON, the front panel power LED flashes. *5 When you use a menu to set this function after short-circuiting the GPI input terminal to which it will be assigned, the backlight goes out and the screen display goes blank making it impossible to check menu operation. To change the setting of this item, be sure to set it when the GPI input terminal is in the open state. Restrictions • The same restrictions apply as during FUNCTION operations. Priority of assigned functions • When both [MARKER1 ON/OFF] and [MARKER2 ON/OFF] are activated at the same time, "MARKER1" has priority. However, when the display aspect ratio is 4:3, the "MARKER1" aspect ratio is 16:9 and the "MARKER2" aspect ratio is 4:3, "MARKER2" is displayed. In this case, the "MARKER2" background is controlled. • When [MARKER BACK HALF] and [MARKER BACK BLACK] are activated at the same time, [MARKER BACK BLACK] has priority. • When [GAMMA SEL. FILM], [GAMMA SEL. STDIO/PST] and [GAMMA SEL. CINEMA] are simultaneously activated, priority goes to [GAMMA SEL. FILM]. The three modes in order of priority are: [GAMMA SEL. FILM] > [GAMMA SEL. STDIO/PST] > [GAMMA SEL. CINEMA]. 61