Panasonic WJRT416V WJRT416V User Guide - Page 41

Rack mounting

Get Panasonic WJRT416V - DIGITAL DISK RECORDER PDF manuals and user guides View all Panasonic WJRT416V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

Rack mounting Use an EIA-standard 19" rack (depth: 550 mm or more). Note: It is necessary to procure four optional rack mount screws (W2-MSS/5008 or M5 x12). z Remove the five rubber feet from the bottom of the recorder using a flathead screwdriver. x Place the provided rack mounting brackets on both sides of the recorder and tighten with the eight provided screws. Remove the rubber feet. Rack mount bracket fixing screw (provided) c Install the recorder with the rack mounting brackets in the rack by using four rack mounting screws. Rack mount bracket (provided) Rack mounting screw: M5 x12 (locally procured) Important: • Keep the temperature in the rack below +45 °C {113 °F}. • Install the recorder in the rack as low as possible, and make a space of 1 unit (44 mm, 1.73") between the recorder and the other mounted appliances. • Do not block the front side of the rack such as by attaching a door panel, etc. • It is recommended to install cooling fans or equivalent equipment to keep the temperature in the rack below +30 °C {86 °F}. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
41
Use an EIA-standard 19" rack (depth: 550 mm or more).
Note:
It is necessary to procure four optional rack mount screws (W2-MSS/5008 or M5 x12).
z
Remove the five rubber feet from the bottom of
the recorder using a flathead screwdriver.
x
Place the provided rack mounting brackets on
both sides of the recorder and tighten with the
eight provided screws.
c
Install the recorder with the rack mounting
brackets in the rack by using four rack mounting
screws.
Rack mounting
Remove the rubber feet.
Rack mount bracket fixing screw (provided)
Rack mount bracket (provided)
Rack mounting screw: M5 x12 (locally procured)
Important:
•
Keep the temperature in the rack below +45 °C {113 °F}.
•
Install the recorder in the rack as low as possible, and make a space of 1 unit (44 mm, 1.73") between the recorder and the
other mounted appliances.
•
Do not block the front side of the rack such as by attaching a door panel, etc.
•
It is recommended to install cooling fans or equivalent equipment to keep the temperature in the rack below +30 °C {86 °F}.