Panasonic WVCW384 WVCW384 User Guide - Page 19

6. Secure the camera to the camera mount bracket with the 3 camera fixing screws (accessories). Pass the video output cable, and power cord and safety wire through the camera mount bracket and secure the safety wire to the camera mount bracket. Important: • Be sure to use the screws that were removed from the tripod head. Recommended tightening torque: 0.59 N·m {0.44 lbf·ft} Camera fixing screw x3 (M4 x 8) (accessories) Tripod head fixing screw x4 Camera mount bracket Camera main body 7. Mount the sunshield on the camera body with the 4 sunshield mounting screws (accessories) after removing the sunshield backside. Sunshield mounting screw x4 (M3 x 6) (accessories) Rear part of sunshield ⁄0 When the tripod socket (accessory) is used (when a different camera mount bracket is used) 1. Remove the 4 tripod head fixing screws from the camera body and remove the tripod head. Disassemble the tripod head and pull out the video output cable and power cord. 2. Mount the tripod socket (accessory) with the 4 mounting screws for tripod socket (accessories). Camera main body 2. Mount the tripod socket (accessory). Mounting screw for tripod socket x4 (M3 x 8) (accessories) 1. Remove the tripod head. 19