Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 147
[DISPLAY SETUP], Description of settings, ENABLE], DISABLE], ON], [SPOT], [OFF]
View all Panasonic microP2 Handheld AVC-ULTRA HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Item [DHCP SERVER] [4G/LTE PROPERTY] [NETWORK TOOLS] [APN] [USER ID] [PASSWORD] [DIAL NO.] [LOG DISPLAY] [STATUS DISPLAY] [INITIALIZE] [PING] Chapter 6 Menu Operations - Menu list Description of settings Sets whether to use the DHCP SERVER function when [DIRECT] is selected in [TYPE] and the camera is connected via wireless LAN. [ENABLE]: Uses the DHCP SERVER function. [DISABLE]: Does not use the DHCP SERVER function. ffFactory setting: [ENABLE] Sets the APN (Access Point Name) provided by the provider. Sets the user name provided by the provider. Sets the password provided by the provider. Sets the phone number. Displays the connection log. Displays the network status. Restores the network setting status to the factory settings. Checks network connection using PING commands. [DISPLAY SETUP] Configure the settings regarding the details to be displayed on the viewfinder or LCD monitor. These menu items cannot be set when the thumbnail screen is displayed. [MENU DISPLAY] Item [ZEBRA1 DETECT] [ZEBRA2 DETECT] [ZEBRA2] [CENTER MARK] [SAFETY MARK] [SAFETY AREA] [FRAME MARK] [FRAME SIG] [FRAME LVL] [LEVEL GAUGE] [FOCUS BAR] [ZOOM/FOCUS] [LEVEL METER] Description of settings Selects the LCD monitor or the view finder as the location where the menu is displayed. [LCD&EVF]: Displays the menu both on the LCD monitor and the viewfinder. [LCD]: Displays the menu only on the LCD monitor. ffFactory setting: [LCD&EVF] Sets the extraction level of zebra pattern 1. [0%]...[109%] ffFactory setting: [70%] Sets the extraction level of zebra pattern 2. [0%]...[109%] ffFactory setting: [85%] Sets on/off of zebra pattern 2 and selects the type. [ON], [SPOT], [OFF] ffFactory setting: [SPOT] Controls the center mark. [1]: + (large) [2]: Open center (large) [3]: + (small) [4]: Open center (small) [OFF]: Does not display. ffFactory setting: [1] Selects the type of frame for the safety zone marker. [1]: Box [2]: Corners [OFF]: Does not display. ffFactory setting: [2] Sets the size of the safety zone marker. The constant ratio of length to width can be set in 1% increments. [80%]...[100%] ffFactory setting: [90%] Enables/disables frame marker. [ON], [OFF] ffFactory setting: [OFF] Sets frame marker aspect ratio. [4:3], [13:9], [14:9], [1.85:1], [2.35:1] ffFactory setting: [4:3] Sets the level of the outside of the frame marker. [0]...[15] ffFactory setting: [15] Enables/disables level gauge. [ON], [OFF] ffFactory setting: [OFF] Displays/hides the focus bar indicating the degree of focus. [ON], [OFF] ffFactory setting: [OFF] Selects the unit of zoom and focus values. [NUMBER]: Displays position values of zoom and focus from [0] to [99]. [mm/feet]: Zoom is displayed in units of millimeters, and focus in units of feet. [mm/m]: Zoom is displayed in units of millimeters, and focus in units of meters. [OFF]: Neither zoom nor focus is displayed. ffFactory setting: [NUMBER] Displays/hides audio level meter. [ON], [OFF] ffFactory setting: [ON] - 147 -