Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 175

Chapter 8 Connecting to External Devices - Connecting to the remote operation panel (AK‑HRP200G) Connecting to the remote operation panel (AK‑HRP200G) ffYou can remotely control some functions by connecting the remote operation panel AK‑HRP200G (optional) via an IP connection. ffWhen you connect AK‑HRP200G using a LAN cable and perform network settings of the camera and the AK‑HRP200G, the camera automatically enters the remote control mode. For the connection settings, refer to "Setting for connection with Remote Operation Panel (AK‑HRP200G)" (page 188). ffTurn the switch of the camera to . Some items may not work in depending on the camera's automatic adjustment settings. In addition, when you perform zoom operations in AK‑HRP200G, set the camera's switch in the position. ffYou can exit the remote control mode by disconnecting from the network from the AK‑HRP200G, or removing the network cable and switching the camera's power switch from to . LAN cable (optional) AK-HRP200G Switch function in remote control mode The following switches and buttons on the camera do not function in remote control mode. ff button ff dial button ff switch ff switch (works when set in the position) ff button ffManual focus operation using the focus ring ffSwitching between auto focus mode and manual focus mode using the switch ffMotorized zoom operation of the zoom lever (grip side/handle side) Recording and playback operations in remote control mode Recording and playback operations cannot be performed from remote operation panel AK‑HRP200G. You can only perform these operations from the camera. Remote control unit connected to the camera When AK‑HRP200G is connected to the camera, the AK‑HRP200G button's operations are as follows: rr Skin tone detail button () Operation varies depending on the lighting status of the button. ffWhen the button lights up, the operation follows the menu setting value of the camera (setting for skin tone detail). ffWhen the button lights off, the skin tone detail function is set to [OFF], regardless of the menu setting value of the camera. After restarting the camera, the menu setting value is reflected in AK‑HRP200G. rr Knee OFF button () Operation varies depending on the lighting status of the button. ffWhen the button lights up, the knee function is set to [OFF], regardless of the menu setting value of the camera. ffWhen the button lights off, the operation follows the menu setting value of the camera (setting for the knee function). After restarting the camera, the menu setting value is reflected in AK‑HRP200G. rr Matrix button () When the button lights up, the menu setting value of the camera is always applied (setting for matrix). The function cannot be turned [OFF] even if the button is pressed. After restarting the camera, the menu setting value is reflected in AK‑HRP200G. rr Scene file selection buttons ( - ) Not supported. rr User file selection buttons ( - ) You can select the camera's scene file F1 to F3. F4 to F6 cannot be selected. rr R flare/pedestal volume (), B flare/pedestal volume () Flare adjustment is not supported. Works only with the pedestal. rr Adjusted value display area (4 digits) Display of CC filter, zoom, and focus values are not supported. - 175 -