Panasonic microP2 Handheld AVC-ULTRA HD Camcorder Operating Instructions Basic - Page 205
During soft keyboard operation, During USB host mode
View all Panasonic microP2 Handheld AVC-ULTRA HD Camcorder manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 205 highlights
Chapter 10 Maintenance and Inspection - Warning system Display [CANNOT SAVE!] [FILE NAME IN USE] [CARD FULL!] [COPY IMPOSSIBLE. TOO LARGE CLIP CONTAINED!] [CLIP NAME:] (clip name) [INVALID VALUE!] [LACK OF CAPACITY!] [MISSING CLIP!] [NO CARD!] [NO COPY TO SAME CARD!] [NO FILE!] [NO INPUT!] [NO SD CARD!] [NOT SELECTED!] [SAME CLIP IS SELECTED!] [TOO MANY CLIPS!] [UNKNOWN CONTENTS FORMAT!] [UNKNOWN DATA!] [USER CLIP NAME MODIFIED!] [WRITE PROTECTED!] Description Behavior and cause A settings file of the same name exists on the SD memory card. Use another name to save the file. The P2 card or SD memory card is full. Insert a card with free space available. Files exceeding 4 GB cannot be copied to P2 memory card or microP2 memory card with 32 GB or smaller capacity. Copy to a microP2 memory card with 32 GB or larger capacity. The data value you entered is invalid. Enter data within the normal range. There is not enough recording capacity left on the card. Insert a card with sufficient recording capacity. Shot marks cannot be attached to the clips unless all clips recorded over multiple P2 cards are present. Insert all P2 cards over which recording extended. No P2 or SD memory card is inserted. Insert the relevant media. A clip cannot be copied to the card storing the original clip. Copy the selected clip to a card that does not contain the original clip. The specified file does not exist. Check the file. No data is entered. Enter data and then set. No SD memory card. Insert an SD memory card. Attempted to delete without selecting clips. Select clips to delete. Multiple instances of the same clip (copies) are included in the clips selected. Multiple instances of the same clip (copies) cannot be copied simultaneously. Remove instances of the same clip from selected items. Too many clips are selected. Reduce the number of selected clips. This is a warning of the contents for the version that is not supported by the camera. Match the device and content versions. You cannot write back only proxy recording clips from the FTP server to the P2 card. Write back (import) proxy recording clips to an SD memory card. The metadata character code is invalid. The metadata character code is UTF-8. Enter valid characters using a viewer. There is a problem with data in the file. Create the file again. When adding a counter value to the clip name, characters must be deleted. For the counter addition setting, the user clip name plus the counter value can only contain up to 100 bytes. Characters in the clip name are automatically deleted when the total number of characters exceeds this limit. The P2 card or SD memory card is write-protected. Insert write-accessible media. During soft keyboard operation Display [AUTHENTICATION ERROR!] [CANNOT CHANGE!] [CANNOT SET!] [INVALID VALUE!] [CANNOT SET!] [NO INPUT!] [CANNOT SET!] [RETRY PASSWORD IS DIFFERENT!] Description Manual authentication failed. An attempt is made to enter the [PERSON] item (user who enters the memo) when there is no text memo. The entered value is invalid. Behavior and cause Enter the correct password. Enter the [TEXT] (text information) first. Change the input value. There is not input to the software keyboard. Enter the password. The re-entered password is different. Enter the correct reference password. During USB host mode Message [CANNOT ACCESS CARD!] [CANNOT ACCESS TARGET!] [CANNOT COPY!] [FORMAT STORAGE DEVICE TO FAT] [CANNOT FORMAT!] [CANNOT RECOGNIZE STORAGE DEVICE!] [CANNOT SELECT!] [MAX. 6 PARTITIONS] [CARD IS EMPTY! CANNOT COPY!] [FORMAT P2 CARD!] [LACK OF CAPACITY!] [MISMATCH COMPONENT!] [STORAGE DEVICE DISCONNECTED!] Description Measure An error occurred while accessing the P2 card. Check the P2 card. An error occurred while accessing the connection target. Check the storage device status and connection. The partition that can copy clips does not exist on the storage device. Reformat in FAT format, or export the P2 card to create a partition. The storage device cannot be formatted. Change the connected storage device. The storage device is not correctly recognized. Reboot the storage device or connect another storage device. Storage devices with more than six partitions cannot be selected (mounted simultaneously). Release selected partitions. The P2 card to copy is empty. The copy operation is not performed because the card is empty. Cannot import to a P2 card containing clips. Format the P2 card. Not enough space left on the storage device. Use a new storage device with sufficient available space or a formatted storage device. The P2 card model number of the copy source and copy Use the P2 cards of the same model number, or import destination do not match. Cannot copy. on a clip basis. Reconnect the USB cable to the The connection with the storage device is disconnected. terminal. When it does not function normally after that, turn off the power once and turn on the power again. - 205 -